Runway lights on Salzburg Airport

29 July 2019

A Tyrolit flaw saw blade being used to make 240 preparative cuts of 45 m each.

The three construction companies used Tyrolit flaw saw blade to make 240 preparative cuts of 45 m each

Possehl Spezialbau has completed surface illumination works on Salzburg Airport’s new runway.

The company, which specialises in the maintenance of vehicular and aircraft-use surfaces, used Tyrolit CDL core drill bits to make more than 800 holes in the runway, for the installation of state-of-the-art LED-illumination.

Possehl used a beheading machine to divide the runway, which measured 45 m (147 ft) wide and 2.8 km (1.7 miles) long, into smaller concrete panels to create as a tension-free base layer. The company used three different specifications of Tyrolit floor saw blades to finish the task, which required over 10.8 km (6.7 miles) of preparatory floor cuts with a width of 15 mm and a depth of 300 mm (three-fifths on an inch to 12 in). This amounted to 240 cuts of 45 m each in length. 

Core drills for the new runway illumination at Salzburg Airport

Over 800 core drills were required for the new runway illumination at Salzburg Airport

The company worked with fellow specialist construction firms, ÖBA and OAT, in order to complete the job within a five-day time slot.

Salzburg Airport’s runway 15/33 was closed for five weeks while around 8,500 t of the original 60 year old runway surface was crushed and recycled. The resulting aggregate was used for the sub-structure of the new runway surface, which comprised 120,000 t of asphalt.

Runway 15/33 at Salzburg Airport in Austria

Runway 15/33 at Salzburg Airport in Austria

 

CONNECT WITH THE TEAM
Leila Steed Editor, Demolition & Recycling International Tel: +44(0) 1892 786 261 E-mail: [email protected]
Peter Collinson International Sales Manager Tel: +44 (0) 1892 786220 E-mail: [email protected]